Features
- 183-inch cutting width
- Minimum Tractor HP: 90 hp
- Three massive tubular beams support the shredder body, for increased strength and reduced vibration
- Shredder drive protected by either a 24,000 lbs. inch overrunning disc clutch or a 30,000 lbs. inch overrunning automatic clutch
- High capacity gearbox with large oil volume reduces heat buildup and extends bearing and gear life
- Specially designed oil seal protectors prevent vines from encasing and damaging gearbox oil seals
- 12.75-inch diameter flail tubes with spiral mounted knives feature increased rigidity for smoother operation
- Optional end-tow transport hitch to easily move to the next job
Specifications
PTO Horsepower | 90 - 300 hp |
Working width | 183" |
Overall width | 190" |
Cutting height | 2" - 14" |
Approximate weight | 4,248 lbs |
Tractor Engine HP | 90 hp minimum |
Tractor PTO speed | 1,000 rpm |
Gearbox rating | 300 hp |
Gearbox warranty | 5 years - limited |
Hitch type | 3-point, 2-point (semi-mounted), or pull (pintle) |
3-point hitch | Cat 2 & 3 |
Driveline size | Cat 6 |
Driveline system | Disc or automatic clutch |
Knife options | 6mm L-knives, 8mm HD-Cotton (Duraface) L-knives or 11-inch cup knives |
Knife retention pattern | Bolt-on (no D-rings) |
Knife speed | 133 mph |
Knife tip speed | 11,700 fpm |
Flail tube speed | 1,350 rpm |
Flail tube diameter (O.D.) | 12.75" |
Flail tube bearing diameter | 2 - 3 / 16" |
Hood Type | Smooth, trilateral shape |
Hood/deck thickness | .18" (optional wearliner available) |
End plate thickness | .25" |
Shielding | Rubber belting or flaps |
Wheel arm types | Rigid strut or caster |
Options | End transport kit, Partial wear liner (doubles body thickness at high wear area), Swing flaps kit, Divider shield, Anti-push skid plate kit, Hydraulic center cutter kit |
Let us help you get moving
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.