Features
| FEATURES | BENEFITS |
| Working Widths | 40" to 50" |
| Weight | 510 lbs. Heavy construction helps penetrate ground. |
| 2" Square frame tube | Frame tubing is stronger than angle iron. |
| Adjustable gang angles | Cutting aggressiveness can be adjusted on the front and rear up to 21 degrees. |
| 3" x 2" Gang tube, 1" sq. gang axles, high carbon steel | high carbon square axles offer great strength in punishing conditions. |
| 16" Notched disc blades | Notched blades for aggressive digging and cutting action. |
| 3/8” Thick bearing hangers | Heavy-duty hangers resist the high torque from U-bolts. |
| Self aligning sealed bearings | Self-aligning bearings offer long life while pounding through hard ground. |
| Rear Roller | 40 7/16" Packing width, Pivots for storage without taking spreader off unit. |
| Spin Spreader Deflector | Allows to reduce seed dispersion width down to 48" |
| Seed hopper height | Loading height (42") for easy of use. |
| Spin Spreader Restrictor Plate | Allows smaller seed to be run through the spreader at a lower volume per acre. |
Specifications
| Model | FPS48 |
| Hitch Type | Pull type with optional 2" ball hitch or clevis hitch |
| Base Unit Weight | 370 lbs. |
| Base Unit Weight | 510 lbs. (With Spin Spreader and roller.) |
| Hitch Weight | 170 lbs. (In transport position with roller up and 100 lbs in Spin Spreader hopper.) |
| Hitch Height with Tongue Level | Adjustable from 15 1/2" to 31" with wheels in transport position. Adjustable from 9 5/8" to 21 3/4" with discs sitting on the ground. |
| Disc Cutting Width | 40" to 50" |
| Minimum ATV Size | 350 cc |
| Minimum Tractor/vehicle Size | 17 hp |
| Height | 52" |
| Length | 104" |
| Width | 54" |
| Weight Load on Each Disc | 46 lbs. |
| Number of Disc Blades | 8 |
| Disc Blade Size & Type | 16" Notched |
| Blade Spacing | 7 1/2" |
| Transport / Gauging Tires | 13" Diameter 4 ply tubeless |
| Bearing Hanger | 3/8" Plate |
| Bearing Type, 2 per Gang | Self Aligning, Sealed Bearing |
| Gang Tube | 3" x 2" |
| Gang Axle | 1" Square high carbon steel |
| Disc Angle | Front Gang: 0, 7, 14 & 21 degrees Rear Gang: 0, 7, 14 & 21 degrees |
| Frame Construction | 2" x 2" Square tubular design |
| Lifting Device | Ratchet Jack or 12 volt Linear Actuator |
| 12 Volt Actuator Amperage | 34 amps at startup. 28 amps during normal operation. |
| Rear Axle pivot Type | Greasable |
| Rear Roller Bearing | Greasable |
| Optional Spin Spreader and Packer | |
| Packer Roller Width | 40 7/16" |
| Spreading Device | Spin Spreader, 12V |
| Spreader Hopper Loading Height | 42" off ground |
| Spin Spreader Volume/Capacity | 2 cu. ft. (15 gallons) (100 lbs. Maximum capacity weight) |
| Wide Spread Pattern Without Deflector |
20 to 25 ft. (Actual spread pattern is dependent upon product type and condition during application.) |
| Spin Spreader Deflector | Diverts seed to smaller spreading width. Seed rate charts calculated at 48" |
| Small Seed Restrictor | Restricts small seed for smaller distribution levels. |
| Fuse Rating 15 AMPS maximum Start-Up Amps 4 Amps (Spreading Material) Normal Operating Amps .5 Amps (Spreading material) |
15 AMPS maximum 4 Amps (Spreading Material) .5 Amps (Spreading material) |
Let us help you get moving
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.