Features
| FEATURES | BENEFITS |
| American made | American made means better quality & parts availability. Most tillers are imported. |
| Tractor hp range* 42" & 50" 58" & 60" 74" 82" |
15-40 hp 20-50 hp 25-60 hp 30-60 hp |
| Reverse tilling action | Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like forward rotation tillers can. |
| 3 year Gearbox Warranty | 3 Years on housing, seals, & bearings. shows our confidence in the product. |
| 10 Year limited warranty on sprockets and roller chain |
Shows our confidence in this product providing many years of service. |
| 42", 50", 58", 66", 74", & 82" Working widths |
A wide range of widths are available to meet specific customer needs. |
| 6-1/2” Digging depth | For deep soil penetration. |
| Bent plate steel upper hitch | Plate steel is stronger than flat bar type hitch. |
| Clevis lower hitch | Provides additional strength and easy one person hook-up. |
| Offset Capabilities | Allows tiller to work closer to objects such as fence lines, buildings and trees. |
| Fits Land Pride Quick-Hitch | Allows for quick and easy one person hook-up. (Offset cannot be used with Quick Hitch.) |
| Adjustable parking stand | Allows for easy hook-up and storage. |
| Adjustable skid shoes | Control depth with seven adjustments. |
| Formed and reinforced rear deflector | Keeps dirt in and leaves a level finish. Forming gives deflector additional strength. Adjustable deflector allows for various finish results. |
| Front deflector | Front deflector is flexible to take the beating from rocks or debris. |
| Bolt in rotor | Rotor removes and replaces easier for servicing. |
| 15" Rotor swing diameter | For deep tilling and turns the soil over faster. |
| 4 ‘C’ shaped heat-treated tines per flange | “C” Shaped tines require less hp to move through the ground. Four tines requires less horsepower than 6 tines. |
| Double lip seal on rotor bearing | Double lip seal helps keep the dirt out and the grease in. |
| Fully shielded slip-clutch driveline | Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having to replace shear-pins |
| #80 Drive chain enclosed in oil bath | Heavy drive chain stretches less, and oil bath keeps wear to a minimum. |
| Stamped chain case cover | Stamped forming gives the chain cover strength. |
| Optional BX driveline | This driveline will fit BX Kubota tractors without cutting it to fit. |
Specifications
| Model | RTR1266 |
| Recommended tractor PTO hp* | 20 to 50 hp |
| Weight | 493 lbs. |
| Width, end plate to end plate | 66" |
| Overall width | 71 1/4" |
| 3-Point hitch type | Category l, Adjustable Lower Hitch Clevis with Plated Pins |
| Fits Land Pride Quick Hitch | |
| Offset capabilities | Tiller can be offset up to 7", but must be centered if using Quick Hitch |
| Sideshift dimensions centered | 33" - 33" |
| Shifted right | 26" - 40" |
| Shifted left | 40" - 26" |
| Number of flanges on rotor | 8 |
| Number of tines per flange | 4 |
| Tine 4construction | Alloy steel heat treated "C" shaped blades |
| Rotor rotation | Reverse Rotation |
| Rotor swing diameter | 15" |
| Rotor Shaft Speed | 211 rpm at 540 rpm PTO |
| Rotor bearing mounts | Machined cast iron |
| Skid shoes | Adjustable |
| Storage stands | Adjustable |
| Rear tailgate | Adjustable rear tailgate |
| Front deflector | Rubber |
| Driveline | Category 4 with Slip Clutch |
| Gearbox Construction | 60 hp input at 540rpm 1.92:1 ratio, Cast iron housing with ASAE 1 3/8" - 6 spline shaft, |
| tapered roller bearings, bevel gears, drain plug, level plug & fill plug | |
| Lubrication | SAE 80-90W EP oil |
| Capacity | 2 pints |
| Drive chain | #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs |
| Drive chain lubrication | Shell Gadus S2 V2200 00 flowable grease or equivalent |
| Land Pride Part #821-045C (32 oz. bottle) | |
| Sprockets | Case hardened teeth, splined bores |
Let us help you get moving
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.