Features
FEATURES | BENEFITS |
Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
Tractor HP range | 20 - 50 HP |
3 Year gearbox warranty | Shows our confidence in the gearbox integrity. |
Cat. 3 driveline with shearbolt | Shear bolt offers maximum driveline protection. |
Cat. 3 driveline with 2-plate slip-clutch | Slip-clutch driveline offers convenience for continual work. |
Floating top link | Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors |
Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
1 1/4” - 10” Cutting Height | Cutting height for wide range of cutting conditions. |
Skid shoes (Accessory) RCR1260 & RCR1272 only | Provides sidewall reinforcement and helps protect bottom of sidewall. |
1/2” x 3” Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
10 Gauge stump jumper | Allows cutter to slide over obstructions protecting the gearbox output shaft. |
High blade tip speed | Ensures clean cut. |
Laminated tailwheel | Laminated material is long lasting in rough conditions and can’t go flat. |
Heavy-duty spindle on tailwheel | 1 1/4” spindle gives the strength to protect tailwheel assembly. |
Rubber guarding | Protect against flying debris. |
Metal Guarding | Protects against flying debris. |
Specifications
Model | RCR1242 |
Weight (With front & rear guard, shear bolt driveline & laminated tire) |
383 lbs. |
Hitch | Category l (Quick hitch ready) |
Cutting Width | 42" |
Overall Width | 45 1/4" |
Overall Length (Including Tailwheel) |
83" |
Deck Height | 7 1/4" |
Cutting Height | 1 1/4" - 10" |
Cutting Capacity | Grass, weeds & light brush |
Recommended Tractor HP | 18-40 hp |
PTO Speed | 540 rpm |
Gearbox Rating HP | 60 hp |
Gearbox (Speed up beveled gears) |
1:1.93 Speed-up Cast iron housing |
Gearbox Lubrication & Capacity | 1.1 Pint of gear lube 80-90W EP |
Deck Construction | 1 Piece reinforced deck |
Deck Material Thickness | 12 Gauge |
Skids | 12 Gauge (Formed in deck) |
Skid Shoes | Not Available |
Stump Jumper | Round Pan 10 ga x 24" |
Blades (2) | 1/2" x 3" Heat treated alloy steel Free-swinging blades |
Blade Bolts | Keyed with harden flat washer and lock nut |
Blade Tip Speed | 11,417 fpm |
Driveline | ASAE Category 3 |
Driveline Protection Options | 1/2" Center shear bolt protection or center bolt 2 plate slip clutch |
Tailwheel | 4" x 8" Laminated tire and yoke |
Safety Guards | Rubber (standard front and rear) |
Let us help you get moving
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.