Double tap to zoom
|48", 60", 72", & 84" Cutting widths||Wide selection of cutting widths to meet specific applications.|
|30-80 hp tractor||Fits a large array of tractors to meet the needs of consumers, municipalities, and
|Available on 60", 72", and 84" models.
Belt tensioner system brings the belt to proper tension by turning a jam nut. Makes
maintaining proper belt tension easy, and increases belt life.
|0"-6" Cutting height||Variable cutting height allows operators to scalp the ground, or leave a 1" to 6" cut.|
|1", 1 1/2", & 2"
Blade cutting capacity
|Ducksfoot blade can cut up to 1" small brush.
Heavy-duty Y blade can cut up to 1 1/2" brush.
Hammer blade can cut up to 2" small saplings.
|Sealed heavy-duty tapered roller
|Sealed for protection from dust and debris.
Withstand shock loads and deflection from heavy use.
|Reverse rotor rotation||Brings the cut material up and over which allows it to be dispersed more evenly. Allows
material to be shredded completely
|High knife tip speed||Knife tip speed 12,046 fpm provides a clean cut, creates a vacuum effect when using
hammer or ducksfoot blades, and slices through saplings with great force when using
heavy-duty Y blades.
|Full width rear access door||Allows for easy access to blades and rotor for replacing blades and cleaning out debris.|
|Quick-change D-ring blade system||Replace ducksfoot blades without any tools.|
|3- “5V” Section Powerband Belt||Powerband belt distributes load evenly, which prevents the belts from jumping off the
drive when a shock load occurs.
|Hitch offset: 8" for FM2548-60
10" for FM2572-84
|The two position hitch allows the mower to be offset to the right for a closer cut
alongside buildings, fences, and roadsides.
|Three blade options: ducksfoot,
hammer, heavy-duty Y
|Three blade options to meet specific applications.|
|Accessible rotor||Rotor can be removed by unbolting cover plates and bearings.|
|Grease zerks on end caps of
driveline cross journals
|Intermediate and main driveline cross journals are easier to grease.|
|Standard removable roller scraper
mounted with only two bolts
|Keeps roller clean for consistent cutting height in wet conditions.
Two bolt mounting makes it easy to remove to allow heavy dry cuttings flow freely over
|Front safety chains||Protects operator and bystanders from debris.|
|Replaceable skid shoes||Prevents wear on end panels from ground contact.|
|Weight of optional rotors:||??|
|Optional brush rake assembly||45 lbs|
|Drive cover height||33"|
|Gearbox rating||80 hp|
|Offset hitch||Center or 8" Right|
|Blade tip speed||12,046 fpm|
|Blade attachment||D-ring for ducksfoot blades, C-clamp for heavy-duty Y and hammer blades|
|Rotor bearings||Spherical roller bearing|
|Brush rakes (standard)||8|
|Rotor diameter||5" With reinforcing bars|
|Rear roller diameter||5.56"|
|Hood/deck thickness||10 Ga|
Let us help you get moving
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.