Features
Features | Benefits |
Quick Hitch Adaptable | Quickly and easily attach chipper to tractor with one person. |
1/4" Thick Rotor Knife | Rotor features 4 replaceable 1/4" hardened steel cutting edges. |
Rotor Knives Can Be Rotated When One Cutting Edge Is Worn | Each rotor knife has two cutting edges to extend rotor knife life. When one edge is worn, rotate rotor knife 180° to a new cutting edge. Less downtime required to sharpen rotor knives. |
Rotor Knives Are Replaceable | Can replace rotor knives when all cutting edges are worn out |
4-Bolt Flanged Bearings | Improves bearing life |
Cat. 4 Shear-Bolt Driveline | Shear-bolt protects the unit when obstructions are encountered |
Skid Extension Supports | Allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints. |
Adjustable Rotating Discharge Chute With Rotation Stops | Directs direction wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator feeding product toward the feed chute. |
Adjustable Deflector Chute | Helps control the distance wood chips will be discharged away from the Wood Chipper. |
Self-Feeding System | Product is pulled in by the sharp cutting edges with each pass of a rotor knife. Operator can be retrieving the next object to load while the unit is chipping the last limb loaded into the feed chute. |
Specifications
Model | WC1504 |
HP Required | 20 to 50 HP (Minimum 35 HP for maximum capacity) |
Weight | 450 lbs. |
Hitch | Cat. l w/ Quick Hitch capabilities |
Upper Hitch Plate Thickness | 5/16" |
Main Frame Thickness | 3/16" |
Rotor Housing Thickness | 3/16" |
Driveline Category | Cat. 4 with shear bolt |
PTO Speed | 540 RPM |
Rotor Speed | 540 RPM (Direct Drive) |
Rotor Size | 25" |
Chip Capacity | 4" |
Hopper Inlet Opening | 20" x 20" |
Chipper Inlet Opening | 10" x 4" |
Spout Discharge Opening | 5 1/4" Square |
Rotor Knife | Reversible and Replaceable |
Number of Rotor Knives | 4 |
Rotor Knife Size | 6" x 2" x 1/4" |
Rotor Knife Material | Hardened Steel (Specifically designed for chipping) |
Feed System | Self-feed |
Feed Height Above Ground | 24" to 30" With adjustable stands |
Feed Height Adjustment | 6 Settings (Includes without adjustable skids) |
Chip Chute Position | 270 degrees |
Discharge Height | 58" to 64" |
Color | Orange, Green & Beige |
Let us help you get moving
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.