Features
FEATURES | BENEFITS |
1/2” Heavy Side panels | Thick end panels guard against abrasion. |
Hydraulic shank tube | Hydraulic shank tube makes for efficient use of time. |
Clevis-type lower 3-point hitch | Allows for easier hook-up of the tractor’s lower draft arms. |
3 Position heat treated spring steel shanks | Positions set for deep to shallow settings. Heat-treated for longevity. |
Roll-formed moldboard | Roll-formed moldboard keeps materials flowing which puts less drag on the Box Scraper, resulting in lower HP requirements and faster working conditions. |
Heat treated dimpled on tips | Easy to replace tips that are heat treated for toughness. |
Heat-treated, reversible and replaceable cutting edges | Heat-treated for hardness. Reversible so both edges can be used before replacing the cutting blades. |
Hinged rear backfill blade. Fixed or floating | Rear backfill blade can be in float or fixed position. For packed down grade, level grade or rough grade |
Warranty | One year parts & labor. |
Category I & II 3-point hitch | Fits a wide variety of tractors. |
Fits Land Pride Quick Hitch | Quick and easy attaching without leaving tractor seat. |
Transport lock on shank tube | Heavy-duty shank lock to keep shanks locked into place during transport. |
Knurled bushings in upper and lower hitch | Work done with retractable box blades is done forwards and backwards. Bushings at hitch points eliminate premature wear. |
Heavy Shank bumpers | A 3/4” square steel bumper is located behind each shank for additional reinforcement. |
Accessories | |
Check Valve | Prevents shanks from drifting down. |
Specifications
Model | HR3584 24" Highback |
Working Width | 84" |
Capacity | 31 cu. ft. |
Weight | 1117 lbs. |
Weight (with hydraulics) | 1119 lbs. |
Number of Shanks | 8 |
Shank Material | 3/4" x 2 1/2" heat treated spring steel |
Shank Penetration | 3- positions (1", 3" & 5" below scraper end plates) |
Shank Tip Construction | Replaceable heat treated dimpled-on tips |
Shank Beam | Pivots to lift shanks up; transport lock on shank tube |
Shank Lift Mechanism | Hydraulic cylinder |
Moldboard | Roll-formed moldboard - 23" |
Side Panels | 1/2" thick x 24" high x 30" deep |
Depth of Bucket | 27 1/2" |
Cutting Blades | 2 ea. 1/2" x 6" high carbon, heat treated cutting edges; reversible and replaceable |
Maximum H.P. Rating | 65 hp |
3-Point hitch construction | Harden bushings in upper and lower hitch points |
3-Point Hitch Type | Category l & II (Quick Hitch ready) |
Let us help you get moving
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.