Features
| FEATURES | BENEFITS |
| Two working widths and several models to choose from |
Designed to meet the operational and geographical needs of our customers. |
| Pull-type clevis hitch attachment | Allows easy one person attachment to a wider range of lower priced new or used utility tractors. |
| High weight per blade concentration | Makes for easier disc penetration. |
| Heavy duty carrier frame and tongue construction | Provides for years of dependable service and performance. |
| Single pin release and lock on five position gang angling front and rear | Makes gang adjustments for less or more aggressive tillage an easy task. |
| Notched or smooth disc selection in 20" or 22" disc sizes | Lets customers choose a configuration that’s just right for their tillage task. |
| Greasable triple sealed disc bearing | Provides for ease of service and longer bearing life. |
| Large transport tires with option of adding two more | Provides capability of road and field transport over tough surface conditions. |
| Hydraulic depth and transport control | Goes from working to transport position and back again with easy single tractor hydraulic control lever manipulation. |
| Front to rear leveling system | Provides uniform front to rear disc gang penetration. |
| Optional dirt Scrapers | Keeps discs from balling up with sticky mud. |
| Optional 18" and 20" furrow filler blades | Provides for more uniform finish on multiple pass applications. |
| Optional center sweep kit | Provides more consistent uniform finish between gangs. |
| Optional tongue jack | Assures easier hitch attachment to tractor. |
| 2 Rear disc choices | Choose Notched or Smooth rear discs to achieve your desired finish. |
Specifications
| Model Numbers | DH3510 |
| Drawbar horsepower requirement | 45-100 hp |
| Weight with 20" discs on 7 1/2" spacing & no other options | 2,491 lbs. |
| Hitch type | Pull-type w/clevis & hole for 1 1/4" pin |
| Hitch frame construction | 3"x 3" x 1/4" Wall tubing w/hose carrier and park jack mount |
| Transport width | 10'-10" Base unit |
| Max. cultivation width | 10'-6" Approx. |
| Mainframe Width | 93" |
| Approx weight load on each blade with 7.5" spacing | 79 to 84 lbs |
| Approx weight load on each blade Blade with 9" spacing | 87 to 93 lbs |
| Disc blade sizes and types | 20" or 22" Notched or smooth |
| Disc blade spacing | 7.5" or 9" |
| Disc bearing type | Greasable & triple lip sealed ball bearings |
| Number of bearings | 12 For all ten foot disc configurations |
| Forward gang angle adjustment | Single pin adjustment to 15, 16 1/2, 18, 19 1/2, or 21 degrees |
| Rear gang angle adjustment | Single pin adjustment to 12, 13 1/2, 15, 16 1/2, or 18 degrees |
| Side mainframe construction | 3" x 4" x 3/16" Wall tubing with gusset reinforcements |
| Mainframe front tube | 5"x 3" x 1/4" Wall tubing |
| Center gang beam construction | 4"x 3" x 1/4" Wall tubing |
| Gang swing arm | 4"x 3" x 1/4" Wall tubing |
| Gang axle construction | 1 1/8" Square hi-strength steel |
| Front to rear leveling system | Manual crank adjustment |
| Depth control | Cylinder stroke control spacers |
| Hydraulic cylinder for depth/lift control | 3"x 8" Hydraulic cylinder with hoses and fittings |
| Transport tires & rims | Two 9.5L x 15 tires mounted on 15" x 6" 5-bolt rims |
| Disc scrapers | Optional |
| Center sweep kit | Optional |
| 20" Rear furrow filler pair | Optional |
| 18" Rear furrow filler pair | Optional |
| Park Jack | Optional |
| Dual wheel transport kit | Optional |
Let us help you get moving
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.