Features
- High Clearance Action Rakes features a “KWIK PIK” (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
- An Adjustable Hitch allows you to level the rake for efficient raking.
- Right and left side raking is done easily by turning either one of the wing transport valves off.
- A 49″ Center Kicker Wheel is optional on all Action Rakes.
- The hitch jack is used to adjust the windrow width as shown.
- Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
- The spring suspension system allows each rake wheel to float independently over the ground. The down pressure for ALL the wheels on each side is done by a single a single hand crank.
Specifications
| 3108 | |
| NUMBER OF WHEELS | 8 |
| WHEEL DIAMETER | 60″ |
| TEETH PER WHEEL | 40 |
| TOOTH DIAMETER | 7.5mm |
| RAKE WHEEL HUBS | Tapered Bearings |
| TRANSPORT WIDTH | 10′ |
| TRANSPORT LENGTH | 19′ |
| TRANSPORT HEIGHT IN TRANSPORT POSITION | 86″ |
| RAKING WIDTH | 15′ - 19′ |
| WINDROW WIDTH ADJUSTMENT | 3′ - 5′ |
| NO. OF RAKING POSITIONS | 6 |
| GROUND PRESSURE RAKE WHEEL ADJUSTMENT | Independent wheel flotation with single side adjustment crank |
| ACTION CYLINDER - RAISE/LOWER | 4 ½″ |
| WING CYLINDERS | 2″ |
| JACK | Standard |
| WEIGHT | 1,800# |
| CENTER KICKER WHEEL | Optional |
| TRANSPORT WHEELS | (2) - ST205/75D15 |
| ADJUSTABLE BALL HITCH | Optional |
Let us help you get moving
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.