New Holland T4V Vineyard Series - Tier 3 Tractors & Telehandlers Model T4.85V for sale at Alanson, Williamsburg, Hillman, Michigan. Serving your new and used equipment needs from Alanson, Williamsburg, and Hillman, MI.

Model T4.85V

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

GO WHERE OTHERS CAN’T
When only the narrowest will do, look to T4V Series tractors. At less than 4 feet wide* with a low straddle-mount platform, they’ll fit between the tightest rows and under low hanging crops. Plus, the low center of gravity provides confidence on hillsides and slopes. Get in, get out and get more done with plenty of horsepower and hydraulic flow to handle the most demanding applications.

* A width as narrow as 43.1 inches is available, depending on tire size.

ENGINE

DON'T LET A SLIM DESIGN FOOL YOU
The narrowest tractors on the market pack a punch. Four-cylinder, 195-cu. in. engines on the T4.75V and T4.85V, and a 275-cu. in. engine on the T4.95V and T4.105V deliver smooth, responsive performance with a torque rise up to 39% for excellent lugging power in the most demanding conditions.

MAXIMUM PERFORMANCE AND FUEL EFFICIENCY
All T4V Series engines are turbocharged and intercooled for superior combustion, power production and fuel efficiency.
• Cross-flow cylinder head keeps intake air cool and dense.
• Premium Bosch rotary fuel-injection pump and five-hole injectors provide precise fuel metering and delivery into all cylinders.

CLEAN AND B100 APPROVED
All engine models are Tier III emissions compliant and approved for B100.* You’ll reduce pollution from the air you breath and around your crops, and have the flexibility to run on up to 100% pure biodiesel. Plus, a 19.5-gallon fuel tank cuts down on trips to the pump.
* Must meet ASTM 6751 standards.

DESIGNED TO LAST
The heavy-duty, cast iron engine block with a dry-sleeve design provides longer service life than competitive wet-sleeve engines, without the risk of coolant contamination. A rear-mounted battery is protected from engine heat and low-hanging branches, and a low 2300-rpm rated engine speed reduces noise and vibration.

TRANSMISSION

MORE CHOICES FOR PRECISE CONTROL
T4V transmissions put you in control with quiet, high-precision helical cut gears, the convenience of left-hand, in-line forward/reverse shuttling and your choice of three smooth gear configurations.

16 x 16 SYNCHRO COMMAND™ TRANSMISSION
Whether you go with the standard mechanical shuttle or opt for the clutchless power shuttle, you’ll enjoy easy left-hand forward/reverse shuttling.
• Eight speeds in the 2- to 8-mph working range suit a variety of jobs.
• Three low-speed gears let you get down to .33 mph during high-control tasks like harvesting.

32 x 16 DUAL COMMAND™ TRANSMISSION
A standard clutchless power shuttle and double the speeds to power through tough spots or gear down to match crop conditions.
• Push button provides a high/low shift for each forward gear, for a total of 16 speeds in the 2- to 8-mph working range and seven gears below 1 mph.
• Powershift is available on the go, under load, and without clutching, and low speeds provide a 20% speed reduction at the wheels with increased torque.Eliminate the hassle of frequent clutching and reduce wear and tear on the driveline with the clutchless, electrohydraulic power shuttle. The lever is positioned at your left fingertips for ultra smooth changes in direction.

SMOOTH CHANGE OF DIRECTION
Eliminate the hassle of frequent clutching and reduce wear and tear on the driveline with the clutchless, electrohydraulic power shuttle. The lever is positioned at your left fingertips for ultra smooth changes in direction.

Model

 T4.85V
Engine  

Type

4-cycle, diesel

Make

New Holland

Model

F5C

Cylinders / Aspiration

4 / Turbocharged and Intercooled

Displacement, cu. in. (L)

195 (3.2)

Block Type

Parent Bore

Rated Speed, RPM

2300

Gross Engine Horsepower

87

PTO Horsepower

72

Torque Rise†

30%

Maximum Torque, lb.-ft. (Nm)†

259 (352) @ 1250 rpm

Emission Legislation

Tier III
Fuel, Air and Lubrication System  

Injection Pump

Bosch VE, Rotary

Injector Type

Direct

Fuel Filter Type

Dual stage fuel filtering system with water/sediment separator followed by a paper filter element cartridge

Fuel Tank Capacity, gal. (L)

19.5 (74)

Air Filter Type

Dry, Dual Element

Service Interval††

500 hours

Muffler

Under hood

Exhaust Outlet

Under right side of operator's station
Transmission  

Transmissions

Base: 16x16 with a Mechanical Shuttle

.

Option 1: 16x16 with a Power Shuttle

..

Option 2: 32x16 with a Power Shuttle

Clutch Type / Size (Mechanical), in. (mm)

Dry, 11 (280) diameter, heavy-duty cerametallic material

Clutch Type / Size (Electro-hydraulic), in. (mm)

Wet, six plates 5.2 (133), organic material

Top Speed

24 MPH
Front Axle  

2WD Front Axle: Steering Angle, degrees

 57

FWD Front Axle: Front Differential Lock

 Fully locking, electro-hydraulic engaged

Steering Angle, degrees.

55
Electrical  

Battery, volts/cca

12/800

Alternator, amps

120

Cold Start Aid

Grid Heater
Hydraulic System  

System Type

Open Center

System Pressure, psi. (bar)

2755 (190)

Implement Pump Flow, gpm. (L/Min): Base - Mechanical Shuttle 

 12.8 (48)

Implement Pump Flow, gpm. (L/Min): Base - Power Shuttle 

17.2 (65)

Steering & Services Pump, gpm. (L/Min): Mechanical Shuttle 

7.3 (28.0)

Steering & Services Pump, gpm. (L/Min): Power Shuttle 

9.4 (35.6)

Remotes Valves

2 (Base), 3 (Optional, includes flow control)

Draft Control

Mechanical

Upper / Lower Limit Setting

Lift-O-Matic

3-Pt Hitch Lift Capacity (24” behind lift point), lbs. (kg)

4497 (2040)

Front Lift and PTO

NA
Rear PTO  

540/1000 RPM

 Optional

Engagement

Mechanical with Hydraulic Servo-Assist
Turning Performance  

Turning Radius: 2WD – without Brakes, ft. (m)

9.8 (3)

Turning Radius: FWD – without Brakes, ft. (m)

11.2 (3.4)
Approximate Weights  

2WD Less Cab, lbs. (kg)

5108 (2317)

2WD Cab, lbs. (kg)

5579 (2531)

FWD Less Cab, lbs. (kg)

5661 (2568)

FWD Cab, lbs. (kg)

6150 (2790)
Dimensions  

Platform Type – Cab / Rollbar

Iso mounted, straddle platform

Wheelbase: 2WD, in. (mm)

81.9 (2079)

Wheelbase: FWD, in. (mm)

82.4 (2093)

Tire Track Widths: Front 2WD, in. (mm)

34.0 (864) – 42.4 (1076)

Tire Track Widths: Front FWD, in. (mm)

34.3 (871) – 41.3 (1049)

Rear, in. (mm)

31.1 (791) – 49.6 (1261)

Min. Overall Width,** in. (mm)

43.1 (1095)

Height to Top of Rollbar,*** in. (mm)

88.6 (2250)

Height to Top of Dash, *** in. (mm)

50.8 (1290)

Height to Top of Cab, *** in. (mm)

84.6 (2148)