New Holland Economy Disc Mowers Haytools & Spreaders Model HM234 Economy for sale at Ginop Sales, Inc., MI. Serving your new and used equipment needs from Alanson, Williamsburg, and Hillman, MI.

Model HM234 Economy

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

FAST MOWING SPEEDS AT A PRICE THAT GOES EASY ON THE WALLET
The HM Series disc mowers deliver smooth, fast cutting speeds at a price that fits any budget. Available in three sizes — with cutting widths from 5 feet, 6 inches to 7 feet, 11 inches — these durable machines can mow through tough crops and rough field conditions.

VERSATILITY
Use your HM Series disc mowers to conveniently mow fields, roadsides, around ponds and buildings.

CLEAN, HIGH SPEED CUTTING
Slice through thick crops, even gopher mounds, at high speed with the HM Series disc mowers. Depending on the model, four, five or six low-profile, oval cutting discs use two knives per disc to slice through the wet grasses. Knives, made of high-quality steel, are reversible for twice the cutting life.

ENCLOSED GEAR-DRIVEN CUTTERBAR
The enclosed gear-driven cutterbar provides years of reliable service. Discs are retained with six bolts for easier service.

PROTECTION AGAINST FIELD DAMAGE
Several important HM Series features fend off foreign objects and keep you moving through the field:
• Rock guards and skid shoes protect the discs and carry the cutterbar over uneven ground.
• A spring-loaded breakaway latch protects the cutterbar by allowing the mower to pivot back the instant it encounters an obstacle.
• An adjustable flotation spring allows you to change cutterbar ground pressure.

OVERRUNNING CLUTCH IS STANDARD
The 540-rpm PTO driveline with overrunning clutch protects the driveline and makes hook-up easy.

HM234 Economy
Cutter Bar
Cutting width ft. in. (mm) 5' 6" (1676)
Cutting height in. (mm) 0.63-2.36 (16-60)
Cutter bar tilt angle degrees 0 to -8
Cutter bar operating range degrees +18 to -30
Breakaway angle degrees 21
Type cutterbar Enclosed gear drive
Number of discs 4
Knives per disc 2
Disc cutting diameter in. (mm) 20.47 (520)
Disc drive Spur gear drive in common sump
Disc speed RPM 3,154
Cutter bar gear protection No
Swath width, approx standard** in. (mm) 50 (1270) includes std. RH swath wheel
Swath width with optional swath wheel** in. (m) 38 (965) w/LH swath wheel
Driveline
Minimum PTO horsepower required hp (kW) 35 (26.1)
Input speed RPM 540
PTO shaft spline/size required 6-spline/ 1 3/8"
Driveline protection Belt drive to cutter bar
Overrunning clutch Standard
Belt tension Adjustable drawbolt
Hydraulics and Hitch
Hydraulic circuits required One remote
Minimum relief pressure required psi (bar) 2,320 (160)
Hitch Category I or II
Dimensions and Weight
Overall width in. (mm) 134.25 (3410)
Overall length in. (mm) 54.33 (1380)
Height - transport position* in. (mm) 92.52 (2350)
Weight, shipping lb. (kg) 933 (423)
Weight, operating lb. (kg) 822 (373)
Maximum transport speed NA
Tires/wheels NA