Land Pride RBT60 Series Rear Blades Snow Removal Model RBT6010 for sale at Alanson, Williamsburg, Hillman, Michigan. Serving your new and used equipment needs from Alanson, Williamsburg, and Hillman, MI.

Model RBT6010

View Other Models:

Get a Quote


Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend


Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Rear blades don't come any tougher than Land Pride's RBT60 Series 3-Way Rear Blade. They are built tough to handle leveling, finish grading and back filling applications involving roadwork, construction, landscaping, nurseries, drainage ditches, feedlot cleaning, farm use and snow removal. The 19" tall rolled moldboard with its grader blade can be hydraulically angled left or right up to 45 degrees, the ends can be tilted up or down by as much a 15 degrees and the whole blade can be offset to the left or right by as much as 55". The blade can also be rotated 180 degrees for blading in reverse with the same angling, tilting and offset capabilities. A retractable parking stand is included to make blade removal, storage and reattachment easier. Available accessories includes hydraulic controlled dual gauge wheels for good depth control, end plates for holding material and skid shoes for blade protection.
Cat. II and Cat III 3-Point Hitch Can go from Cat. II to Cat. III 3-point tractor. Enables a wider variety of tractors to be used.
Blade angles left and right up to 45 degrees hydraulically Allows the operator to set the blade at the angle of his choice to complete the job with satisfactory results.
Blade offsets left and right up to 55” hydraulically Allows the operator to position the end of the moldboard beyond tractor tire and close to solid obstacles such as fences, buildings and abutments.
Blade tilts up and down up to 15 degrees hydraulically Allows the operator to do simple tasks such as putting a crown in the middle of a road to making V-type ditches of various sizes.
Mainframe is fully welded and reinforced Overall Mainframe strength is enhanced due to being fully welded.
Heavy-duty pivot assembly with 4 1/2” Diameter solid steel moldboard kingpin 1” Plate steel turntable and 4 1/2” King pin for handling high torque in this area
Formed 19” high moldboard Can move a great deal of material in a short time.
1/2” Formed Moldboard with 3/8” formed channel reinforcement Makes it one of the strongest moldboards in its class for handling heavy loads.
Retractable parking stand Enables one person hook-up and keeps the mainframe off of the ground.
Front pivot shaft has two grease points Helps front pivot shaft to move easily.
Heavy-duty blade pivot assembly 1” Plate steel turntable and 4 1/2” kingpin handle tremendous torque delivered by up to 225 HP tractors.
Skid shoes (optional) Skid shoes protect moldboard from hitting low lying obstructions such as manhole covers.
End plates (optional) End plates allow the blade to hold material in to drag from one spot to another.
Dual gauge wheels (optional) Gauge wheels position the height of the blade to aid in grading.